Error during incremental processing of dimension

I have an integration services package that includes a data flow transformation that does an incremental processing for a dimension. The task executes successfully with a small amount of records in the data source query. However, when I attempt to process the large set, I get the following errors:

[Dimension Processing [1192]] Error: Parser: An error occurred during pipeline processing.
[Dimension Processing [1192]] Error: Errors in the OLAP storage engine: The process operation ended because the number of errors encountered during processing reached the defined limit of allowable errors for the operation.
[Dimension Processing [1192]] Error: Errors in the OLAP storage engine: An error occurred while the 'Last Name' attribute of the 'Consumer' dimension from the 'DataWarehouseOLAP' database was being processed.
[Dimension Processing [1192]] Error: File system error: The record ID is incorrect. Physical file: . Logical file: .
[Dimension Processing [1192]] Error: Errors in the OLAP storage engine: The process operation ended because the number of errors encountered during processing reached the defined limit of allowable errors for the operation.
[Dimension Processing [1192]] Error: Errors in the OLAP storage engine: An error occurred while the 'Email Address' attribute of the 'Consumer' dimension from the 'DataWarehouseOLAP' database was being processed.
[Dimension Processing [1192]] Error: File system error: The record ID is incorrect. Physical file: . Logical file: .
[DTS.Pipeline] Error: The ProcessInput method on component "Dimension Processing" (1192) failed with error code 0x80004005. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0x80004005.
-

I am trying to figure out more information about these errors, but cannot figure out what the problem is. Can someone point me in the right direction?

Clayton

We just encountered the same error. Did you figure out what it was?|||No I did not. I am still stuck on it. I will let you know if I do.|||

Please log your situation in http://connect.microsoft.com/sql. If you willing to share your data to troubleshoot, make sure you provide your contact information.

Edward.
--
This posting is provided "AS IS" with no warranties, and confers no rights.

|||

Hi,

I am facing the same issue. Can you please let me know if there is a solution for resloving this ?

Regards,

Dinesh Reddy N Y

|||

Sounds like you're exceeding the 4 GB limit for string stores. Do you have an attribute with a string key?

Error Codes?

My data flow component is throwing an error and the only help I get is the following:

error code: -1071607694

error column: 257

What in the world does this mean? Can it get more cryptic than this?

Search is your friend.

http://wiki.sqlis.com/default.aspx/SQLISWiki/0xC0209072.html

You have a conversion issue.

error code 0xC0202025

i need to export the contents of a sql server 2005 table to excel in ssis. there are two nvarchar(max) colums in my table. the data flow task in my package fails unless i remove these two columns from the table, then it works fine. the error code being returned is 0xC0202025. HELP!http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=412859&SiteID=1|||no luck converting the columns to nvarchar(4000) either.|||Did you recreate the metadata in the Excel Destination?|||yes.

Error at parse query

Hello

I have the following:

One data flow task in the control flow
In this data flow task I have an OLE DB Source with the following sql command

'.... where cc = ?'

Then I click on the Parameters button and I map the ? to the right Parameter

Parameter0 = User::var_cc

When I click on parse query I get the following message :

"Parameter Information cannot be derived from SQL statements. Set parameter information before preparing command."

Anyone has an idea?
ThxThis is a known issue. Parse Query does not know how to use the parameters you mapped.

If you do not get any error after clicking OK, your query should be fine and you can safely ignore the error from Parse Query.

ERROR AT DATA FLOW TASK

HI, I HAVE A NEW PROBLEM...HOPE SOMEONE KNOWS WHAT THE $#%#$ IS HAPPENING. HERE IT′S THE THING: I′M USING A DATA FLOW TASK TO READ DATA FROM AN ORACLE SERVER AND TRANSFER THE INFO TO MY SQL 2005 SERVER, THE SOURCE IS AVAILABLE AND THE CONNECTION IS WORKING, I'M USING A DATA READER SOURCE TO CONNECT AND EXTRACT. I′VE PUT THIS DTS IN A JOB AND IT WAS OK, IT HAD BEEN RUNNING OK FOR ALMOST A MONTH BUT SUDDENLY HIS MORNING IT FAILED WITH THE FOLLOWING ERROR:

SSIS package "SAZSIE_CargaVentasSeguros (1).dtsx" starting.

Information: 0x4004300A at Extrae SAZ_GranoO_New, DTS.Pipeline: Validation phase is beginning.

Information: 0x4004300A at Extrae SAZ_GranoO_New, DTS.Pipeline: Validation phase is beginning.

Information: 0x40043006 at Extrae SAZ_GranoO_New, DTS.Pipeline: Prepare for Execute phase is beginning.

Information: 0x40043007 at Extrae SAZ_GranoO_New, DTS.Pipeline: Pre-Execute phase is beginning.

Information: 0x4004300C at Extrae SAZ_GranoO_New, DTS.Pipeline: Execute phase is beginning.

Error: 0xC0047062 at Extrae SAZ_GranoO_New, SAZ_GranoONew [421]: System.NullReferenceException: Object reference not set to an instance of an object.

at Microsoft.SqlServer.Dts.Pipeline.DataReaderSourceAdapter.PrimeOutput(Int32 outputs, Int32[] outputIDs, PipelineBuffer[] buffers)

at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostPrimeOutput(IDTSManagedComponentWrapper90 wrapper, Int32 outputs, Int32[] outputIDs, IDTSBuffer90[] buffers, IntPtr ppBufferWirePacket)

Error: 0xC0047038 at Extrae SAZ_GranoO_New, DTS.Pipeline: The PrimeOutput method on component "SAZ_GranoONew" (421) returned error code 0x80004003. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.

Error: 0xC0047021 at Extrae SAZ_GranoO_New, DTS.Pipeline: Thread "SourceThread0" has exited with error code 0xC0047038.

Information: 0x402090DF at Extrae SAZ_GranoO_New, OLE DB Destination [1022]: The final commit for the data insertion has started.

Information: 0x402090E0 at Extrae SAZ_GranoO_New, OLE DB Destination [1022]: The final commit for the data insertion has ended.

Information: 0x40043008 at Extrae SAZ_GranoO_New, DTS.Pipeline: Post Execute phase is beginning.

Information: 0x40043009 at Extrae SAZ_GranoO_New, DTS.Pipeline: Cleanup phase is beginning.

Information: 0x4004300B at Extrae SAZ_GranoO_New, DTS.Pipeline: "component "OLE DB Destination" (1022)" wrote 19522 rows.

Task failed: Extrae SAZ_GranoO_New

Warning: 0x80019002 at SAZSIE_CargaVentasSeguros: The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.

SSIS package "SAZSIE_CargaVentasSeguros (1).dtsx" finished: Failure.

THE DATA HAS BEEN COPIED INTO MY DESTINATION TABLE, BUT THE PACKAGE ENDS IN AN ERROR, WHAT IS THE PROBLEM WITH THIS?

PLASE SOMEONE !!!!

THANKS!!!!!!!

the problem was that those idiots changed the source by adding a new field in their table and my package wasn′t updated with the new definition of it... thanks anyway...|||take it easy|||

ruk_walled wrote:

the problem was that those idiots changed the source by adding a new field in their table and my package wasn′t updated with the new definition of it... thanks anyway...

Hence you should always use a SQL statement rather than referencing a table by name!

-Jamie

|||

it′s exactly what i did... after the error of course ;)

thanks for your advice!!!

|||Interesting. I just ran into this same problem, with the same cause - source table structure changed.

However, the query I was using to retrieve from it was of the form "select * from <blah>".

It took deleting and recreating the step to fix the error. Do SSIS packages cache table structures or something?|||

LpAngelRob wrote:

It took deleting and recreating the step to fix the error. Do SSIS packages cache table structures or something?

Any component in a dataflow that acceses something external to the package has something called the ExternalMetadata collection which is information about what that external thing "looks" like. If that external thing doesn't look like what the SSIS package is expecting - you'll get problems.

-Jamie

ERROR AT DATA FLOW TASK

HI, I HAVE A NEW PROBLEM...HOPE SOMEONE KNOWS WHAT THE $#%#$ IS HAPPENING. HERE IT′S THE THING: I′M USING A DATA FLOW TASK TO READ DATA FROM AN ORACLE SERVER AND TRANSFER THE INFO TO MY SQL 2005 SERVER, THE SOURCE IS AVAILABLE AND THE CONNECTION IS WORKING, I'M USING A DATA READER SOURCE TO CONNECT AND EXTRACT. I′VE PUT THIS DTS IN A JOB AND IT WAS OK, IT HAD BEEN RUNNING OK FOR ALMOST A MONTH BUT SUDDENLY HIS MORNING IT FAILED WITH THE FOLLOWING ERROR:

SSIS package "SAZSIE_CargaVentasSeguros (1).dtsx" starting.

Information: 0x4004300A at Extrae SAZ_GranoO_New, DTS.Pipeline: Validation phase is beginning.

Information: 0x4004300A at Extrae SAZ_GranoO_New, DTS.Pipeline: Validation phase is beginning.

Information: 0x40043006 at Extrae SAZ_GranoO_New, DTS.Pipeline: Prepare for Execute phase is beginning.

Information: 0x40043007 at Extrae SAZ_GranoO_New, DTS.Pipeline: Pre-Execute phase is beginning.

Information: 0x4004300C at Extrae SAZ_GranoO_New, DTS.Pipeline: Execute phase is beginning.

Error: 0xC0047062 at Extrae SAZ_GranoO_New, SAZ_GranoONew [421]: System.NullReferenceException: Object reference not set to an instance of an object.

at Microsoft.SqlServer.Dts.Pipeline.DataReaderSourceAdapter.PrimeOutput(Int32 outputs, Int32[] outputIDs, PipelineBuffer[] buffers)

at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostPrimeOutput(IDTSManagedComponentWrapper90 wrapper, Int32 outputs, Int32[] outputIDs, IDTSBuffer90[] buffers, IntPtr ppBufferWirePacket)

Error: 0xC0047038 at Extrae SAZ_GranoO_New, DTS.Pipeline: The PrimeOutput method on component "SAZ_GranoONew" (421) returned error code 0x80004003. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.

Error: 0xC0047021 at Extrae SAZ_GranoO_New, DTS.Pipeline: Thread "SourceThread0" has exited with error code 0xC0047038.

Information: 0x402090DF at Extrae SAZ_GranoO_New, OLE DB Destination [1022]: The final commit for the data insertion has started.

Information: 0x402090E0 at Extrae SAZ_GranoO_New, OLE DB Destination [1022]: The final commit for the data insertion has ended.

Information: 0x40043008 at Extrae SAZ_GranoO_New, DTS.Pipeline: Post Execute phase is beginning.

Information: 0x40043009 at Extrae SAZ_GranoO_New, DTS.Pipeline: Cleanup phase is beginning.

Information: 0x4004300B at Extrae SAZ_GranoO_New, DTS.Pipeline: "component "OLE DB Destination" (1022)" wrote 19522 rows.

Task failed: Extrae SAZ_GranoO_New

Warning: 0x80019002 at SAZSIE_CargaVentasSeguros: The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.

SSIS package "SAZSIE_CargaVentasSeguros (1).dtsx" finished: Failure.

THE DATA HAS BEEN COPIED INTO MY DESTINATION TABLE, BUT THE PACKAGE ENDS IN AN ERROR, WHAT IS THE PROBLEM WITH THIS?

PLASE SOMEONE !!!!

THANKS!!!!!!!

the problem was that those idiots changed the source by adding a new field in their table and my package wasn′t updated with the new definition of it... thanks anyway...|||take it easy|||

ruk_walled wrote:

the problem was that those idiots changed the source by adding a new field in their table and my package wasn′t updated with the new definition of it... thanks anyway...

Hence you should always use a SQL statement rather than referencing a table by name!

-Jamie

|||

it′s exactly what i did... after the error of course ;)

thanks for your advice!!!

|||Interesting. I just ran into this same problem, with the same cause - source table structure changed.

However, the query I was using to retrieve from it was of the form "select * from <blah>".

It took deleting and recreating the step to fix the error. Do SSIS packages cache table structures or something?|||

LpAngelRob wrote:

It took deleting and recreating the step to fix the error. Do SSIS packages cache table structures or something?

Any component in a dataflow that acceses something external to the package has something called the ExternalMetadata collection which is information about what that external thing "looks" like. If that external thing doesn't look like what the SSIS package is expecting - you'll get problems.

-Jamie